10 Best Braid for Desoldering In The Us - Black Friday 2024
Best Choice1
MG ChemicalsMG Chemicals - 453 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 50' Length x 0.075" Width
Main highlights- Static free bobbins
- Oxide-free clean copper
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
MG ChemicalsMG Chemicals 454 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 50' Length x 0.1" Width, Blue
Main highlights- Static free bobbins
- Oxide-free clean copper
- Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
- Manufactured under SPC guidelines
- Designed to leave a residue that is environmentally safe
9.7Exceptional
View offer on:
Show more
3
LesnowLesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components
9.3 materials Quality9.1 Simple to use8.9 worth the moneyWhy we love it
Efficiently removes solder from various electronic components.
10ft length ensures ample supply for extended projects.
High-quality copper braid enhances absorption and capillary action.
9.6Exceptional
View offer on:
Show more
4
TOWOTTOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'
Main highlights- Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!
- Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
- Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
- Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
- Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
9.5Excellent
View offer on:
Show more
5
SRA Soldering ProductsSRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool
Main highlights- PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.
- High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
- Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
- Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
- 10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
9.4Excellent
View offer on:
Show more
6
BEEYUIHFBEEYUIHF Desoldering Wick Braid 30M - 98ft Length 2.5mm Width Solder Wick Braid with Flux, Cable Remover Tool Solder Sucker W 0.10'' L 98'
Main highlights- Wide range of use:The braided solder wick is suitable for studio, laboratory, school, home, professional repair, DIY hobbyist and industrial soldering work; and the wick is designed with fine weave, Increase the speed of cleaning the PCB pad. Bring convenience to your welding work.
- The desoldering wicks Feature: Oxidation resistivity and anti-corrosion protection,good thermal conductivity. Speed up the speed of absorbing tin and low residue of flux. Increase the speed of cleaning the PCB pad.
- Solder Remover wire Materials：The tin suction line is woven with flat needles, soft design,fast heat conduction, suitable for rapid tin suction, not only improving work efficiency and quality, but also more clean.The Braided Desoldering wicks are made of 100% copper wires with a fine braid design.
- Desoldering wick advantage: Refined chemical formula, resistant to oxidation and corrosion,clean tin absorption.Fast heat conduction, suitable for various electronic PCB circuit boards.
- BEEYUIHF Desoldering wick with flux Size: W 0.10'' L 98'; width: 2.5mm, Length: 30M - 98ft - Large Size Desoldering Braid
9.3Excellent
View offer on:
Show more
7
MG Chemicals10% OffMG Chemicals - 454-NS Desoldering Braid #4 No Clean Super Wick Desoldering Braid, 0.1" Width x 50' Length, Blue
Main highlights- No clean super wick
- High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III
- Flux residue remaining on board does not have to be cleaned
- Flux residue is non-conductive and non-corrosive. Static free bobbins.
- Disclaimer: Color may vary slightly according to screen settings and resolution
9.1Excellent
View offer on:
Show more
8
Hotop12 Pieces Solder Wick Solder Braid Wick Set Desoldering Braid Wick (2.0 mm, 2.5 mm, 3.0 mm)
Main highlights- Various sizes: you will receive 12 pieces of solder braid wicks in 3 sizes, width respectively is 2.0 mm, 2.5 mm, 3.0 mm, and the length is 1.5 m; 4 pieces for each size, enough quantity and length for your daily needs
- Quality material: the desoldering wicks are made of quality copper wires, and the design of precise weaving can improve the capillary effect and the redundant solder absorbing ability, increasing the work efficiency
- Low residue design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time to clean it
- Extensive applications: the braided solder wicks are suitable for labs, home and industry welding work; And the wicks adopt fine braid design to promote strong capillary action, bringing more convenience for your daily work
- Easy to use: the desoldering wicks can provide a nice way to correct mistakes on small PCB boards and will not make the damage, suitable for re-soldering and desoldering
8.9Very Good
View offer on:
Show more
9
MOGAOPI23% OffMOGAOPI Solder Wick and Desoldering Pump, Spare nozzle, Solder Sucker, Desoldering Wick,1pcs Solder Braid Desoldering Vacuum Pump Solder Remover Tool
Main highlights- Widely used Solder Remover: The Desoldering Wick, Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- One handed solder sucker with powerful suction: you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and vacuum button, which make the sucking power awesome
- Desoldering Wick with copper braid: 1pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area
- ABS body with non-slip sponge and Nylon nozzle desoldering pump: The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time
- 4 in 1 Solder Removal Tool: 1pcs desoldering vacuum pumps ,1pcs Spare nozzle ,1pcs solder wicks and 1pcs High Temperature Resistance Silicone Protective Tube 15cm Length, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts
8.8Very Good
View offer on:
Show more
10
DaFuRuiDaFuRui Solder Wick，10 Pack No-Clean Soldering Wick Braid Desoldering Wick Braid With Flux（1.5mm/2mm/2.5mm/3mm/3.5mm Width 5Ft/1.5mm Length)
Main highlights- ★【Widely Used】The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Improves work efficiency, ot damage the PCB board.
- ★【Various Sizes】Width：0.59"/1.5mm、0.79"/2mm、0.98"/2.5mm、1.18"/3mm、1.38"/3.5mm；Length：5Ft/1.5mm
- ★【Package Include】10 packs No-Clean Solder Braided Wicks.Enough quantity and length for your daily needs.
- ★【No-clean Design】 The solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, not need to removing them.
- ★【Low Residue】Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder.Help to clean the solder and avoid short circuit.
8.7Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for braid for desoldering
