10 Best Boost Converter Module Board In The Us
Best Choice1
ACEIRMCACEIRMC 1500W 30A DC-DC Boost Converter DIY Step-up Boost Constant Stream Power Supply Module Board in 10-60V Out 12-90V Electric Unit Module (1500W 30A Boost Converter)
Main highlights- Widely Application:DIY a regulated power supply, input 12V, the output can be adjusted 12-80V;DIY a high-power notebook mobile power;As a car power supply, power your laptop, PDA or a variety of digital products;
- When using battery power, if the battery loses power, it will not damage the power module and battery.
- Solar panel voltage regulator;Charge the battery, lithium battery, etc.;Drive high-power LED lights
- Note:Never use a short-circuit output to adjust the current. The circuit structure of the boost module cannot be adjusted by short circuit.
- 1500W 30A DC converter boost step-up power supply module 8-60V to 12-80V, it's a non-isolated boost power supply module
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DasiterApoesar 600W High Power DC to DC Boost Converter DC 12-60V to 12-80V Boost Module Board Step-up Transformer
Main highlights- 【DC to DC Boost Converter】Two or more modules can not be used in parallel input and output, otherwise the current limit function will be invalid
- 【DC to DC Boost Converter】The module has a constant voltage and constant current function, but it is a non-isolated boost mode, due to its characteristics, the constant current range depends on the input and output voltage and load.
- 【DC to DC Boost Converter】Specifications: Radiator bottom plate thickness 5mm, tooth height 21mm, length 85mm, width 63mm, booster plate fixed above the radiator, rational design, integrated design of radiator and booster plate, convenient for users to use directly, use long screws fixed directly.
- 【DC to DC Boost Converter】Please Power on the module first, then connect the load, which is especially important in high-power loads; the input voltage should be stable, especially when some low-voltage (12V) input power supply is connected to the load voltage, it will fall below 10V, and it is easy to break down the power tube at this time.
- 1.【DC to DC Boost Converter】600W high power booster module, wide voltage input: 10V ~ 60V, 12V ~ 80V adjustable wide voltage output; output current can be adjusted; ultra-low input and output pressure difference.
9.6Exceptional
View offer on:
Show more
3
ComidoxComidox 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Power Module Voltage Boost Converter Board 0.9-5V to 5V 5PCS
Main highlights- Weight: about 1g
- Pin 2.54MM pitch.
- Input voltage: 0.9-5V, output voltage: 5V, maximum output current: 480 mA.
- Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch)
- DC-DC boost converter module, operating frequency 150KHZ, typical conversion efficiency of 85%.
9.5Excellent
View offer on:
Show more
4
DWEIIDWEII 10PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB for DIY Charger (no Welding Version)
Main highlights- ❃❃When the load current is less than 50mA continuously, the output will be turned off.
- ❃❃USB is no welding version
- ❃❃It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- ❃❃1; When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated; 2; When the battery voltage drops below 4.1V, the charging cycle starts again. 3; When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- ❃❃10PCS ( no welding version) Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB For DIY Charger
9.2Excellent
View offer on:
Show more
5
Teyleten RobotTeyleten Robot XL6009 XL6009E1 Boost Converter Module DC - DC 3-30V to 5-35V Output Voltage Adjustable Step-up Converter Board Module Better Than LM2577 (10pcs)
Main highlights- Voltage Adjustment Rate:±0.5%;Load Adjustment Rate:±0.5%
- Output voltage 5V~45V
- Operating Temperature:-40℃~ +85℃
- Input voltage 3V~32V, the best working voltage range is 5~32V
- Built-in 4A high-efficiency MOSFET switching tube, so that the efficiency of up to 94% (LM2577 current is only 3A)
8.9Very Good
View offer on:
Show more
6
JUZITAO12PCS Type-C USB 5V 2A Step-Up Power Module Boost Converter Lithium Battery Charging Protection Board with LED Indicator(Not Welded)
Main highlights- When the load current is less than 50mA continuously, the output will be turned off.When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
- When the battery voltage drops below 4.1V, the charging cycle starts again.When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- The boost converter supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- It supports discharging while charging. The usb-a base weldingposition is provided on the back of the product, which can be installed manually.
- Input voltage range: 5 ~ 5.5V; Charging cut-off voltage: (4.2v/4.35v) ± 0.5%; Charging current: 2.4A ± 5%; Boost output voltage: 5V ~ 5.15v (line loss compensation); Boost output voltage ripple: 100mV; Boost output current: 2A.
8.8Very Good
View offer on:
Show more
7
QEBIDUMQEBIDUM 10Pack DC-DC Step Up Converter Board Module, 0.9 V 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Synchronous Switching Regulator DIY Non-Isolated Voltage Boost Converter for Arduino
Main highlights- Ultra-Small Size: The boost converter module dc to dc is mini size, 11mm*11mm size, with 2.54mm interface.
- Ultra-Low Power Consumption: When there is no load, the input current is only 3uA（Input Voltage more than 3V）, effectively reducing energy consumption and extending the battery life of the device, QEBIDUM boost converter suitable for IOT applications.
- The Wide Input Voltage Range: QEBIDUM dc to dc step up converter Supports voltage input from 0.8V to 5V, adapt to various power conditions, and ensures stable operation in various application scenarios, such as IOT Application.
- PFM/PWM Automatic Switching: low power dc to dc voltage booster works in PFM mode when lightly loaded and automatically switches to PWM mode when heavily loaded. The maximum frequency is 1.2Mhz, and high frequency modulation reduces output ripple.
- Multiple Protection Functions: The dc voltage booster input side has a one-time fuse, and the boost regulator output supports overcurrent protection and short-circuit protection, as well as over-temperature protection and other functions.
8.7Very Good
View offer on:
Show more
8
DROK14% OffDROK Voltage Boost Converter, DC 6-30V 5V Step Up to DC 7-32V 12V 24V 5A Adjustable Volt Regulator, LCD Power Supply Module Voltage Current Amp Display Transformer Circuit Board with Case
Main highlights- Parameter --- Input voltage: DC 6-30V; Output voltage: DC 7-32V continuously adjustable (the output voltage must be at least 1.5V higher than the input voltage); Output current: 5A (max), adjustable, recommended to use within 4A; Output power: 60W (max), recommended to use within 50W.
- NOTE --- 1). Constant current adjustable means that CC mode only works when the actual load output current is greater than the setting one, otherwise it will work in a constant voltage state, not the current is adjusted to 2A, then it will become 2A for any load being connected. And if the CC value to be adjusted is small, adjust “ADJ-I” counterclockwise a few more times to change. 2). The case is packaged disassembly to avoid damage during transit. It needs to be manually installed.
- General Application --- This voltage step up converter can be used as ordinary step-up module with over-current protection, constant current LED driver module; DIY a solar power controller, etc.
- Features --- Constant current/voltage mode; Voltage calibration calibration; Protective case; Short-circuit protection; Over-temperature protection; Input reverse connection protection. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF].
- Clear LCD Display --- The boost board is designed with a large clear digital LCD display on which shows both voltage and current value simultaneously. Which is easy to read and can help the user easily monitor the output voltage, then largely enjoy their DIY work.
8.5Good
View offer on:
Show more
9
DORHEADorhea 10PCS 5V Regulator Module Mini Voltage Reducer Adjustable DC 4.5-24V 12V 24V Step Down to 5V 3A Buck Converter Board Reduced Voltage Regulator Power Supply Transformer Module
Main highlights- Voltage regulator input voltage range is DC 4.5-24V, adjustable range is 0.8-17V, fixed output are 1.8V, 2.5V, 3.3V, 5V, 9V, 12V that can be chosen on the back side. Max output current: 3A (please enhance cooling work when it is full load); If the actual test input is 12V and output is 1.5A, no other system is required.
- Integrated enable port defaults the working mode and it will be off when it is at low electric level off, which bring a great convenience for users. NOTE: This 5v step down converter is really tiny, each unit is smaller than half a one-dollar coin.
- High efficiency and super compact size, high frequency and low ripple, stable working performance, wide range of applications, this 12v to 5v converter will be a good component for fixing work.
- Convenient to use, integrated enable port of the regulator board defaults to working mode and will be closed when it is at low electric level off, and with ultra-low quiescent current, quiescent current is 0.85 mA; It can be connected to the car battery without a switch, cigarette lighter cord or the ACC power cord.
- Adjustable and fixed voltage output, you can get fixed output voltage by soldering the pot on the board of regulator module; You can also adjust the fixed output voltage by potentiometer as you needed. Default output is adjustable. Note: if you need to fix the output voltage, use a knife to cut the wires in the red circle in the picture, and then connect the pads with solder at the voltage you need.
8.4Good
View offer on:
Show more
10
ACEIRMCACEIRMC 3pcs XL6019 5A High Power Current DC to DC Step-up 5V 6V 12V 24V 3-35V to 5-40V XL6019 Converter Adjustable Voltage Regulator Power Modules Boost Module Booster (3pcs)
Main highlights- XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module
- Input and Output must be connected correctly
- Conventional Constant Voltage Output BOOST Fully Integrated Solutions, Integrated MOSFET, Fewer External Components, Smaller Cos System
- Built-in over temperature protection, full set overcurrent protection circuit reliability, high reliability
- Adjust the blue knob of the potentiometer (counterclockwise general impulse, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage
8.3Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for boost converter module board
