10 Best Arduino Oled 128x32 Ssd1306 In The Us - Black Friday 2024
Best Choice1
AITRIPAITRIP 10 Pieces 0.96 Inch OLED I2C IIC Display Module 12864 128x64 SSD1306 Mini Self-Luminous Display Board Compatible with Arduino/Raspberry PI -White
Main highlights- Embedded driver IC: Communication: I2C/IIC Interface, only need 2 I/O ports; Compatible with MMDVM, Pi-Star； Instructions : https://wiki.52pi.com/index.php?title=S-0005
- Applications: MP3, MP4, watch；Head-mounted displays；Meters and other intelligent instruments；IT is compatible with Arduino Mega, Raspberry pi, 51 MCU, STIM 32, etc
- 128 X 64 PIXELS:Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC；Power consumption: 0.04W during normal operation, full screen lit 0.08W
- 0.96 inch OLED module for showing graphical and textual information directly on your micro-controller projects；Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
9.7Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DORHEADORHEA 10PCS 0.91'' 12832 IIC I2C OLED Display Module 0.91inch I2C 128x32 SSD1306 LCD Display Module Blue I2C OLED Screen Driver DC 3.3V/5V with 4 Pin Headers
Main highlights- The I2c OLED display performance is better than the traditional LCD display, also lower consumption, high resolution OLED for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output.
- The 12832 display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface.
- The 0.91 display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver.
- 0.91 oled compatible with ESP8266, ESP32, STM32, etc
- 0.91 inch OLED display, no need backlight, self-illumination, Display Color : Blue, Resolution: 128 x 32.
9.6Exceptional
View offer on:
Show more
3
Teyleten RobotTeyleten Robot 0.91 inch OLED LCD Display Module SSD1306 IIC 128x32 LCD OLED Screen 3.3V~5V 4PIN for Arduino White 5PCS
Main highlights- Resolution: 128 x 32 IIC interface Display
- Pin Description: GND: Power Ground VCC: Power + (DC 3.3 ~5v) SCL: Clock Line SDA: Data Line
- OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
- Driver IC: SSD1306
9.4Excellent
View offer on:
Show more
4
iPistBitiPistBit 5 Pcs 0.91 Inch I2C OLED Display Module, 128x32 Pixel SSD1306 Luminous OLED Screen Board Compatible with Arduino Raspberry Pi ESP32 (Blue)
Main highlights- The module pins are soldered and housed in a small bag to prevent them from falling off during transportation.
- The OLED display module is compatible with Raspberry Pi, Beagle Bone Black, Arduino Nano, UNO, R3, Mega, 51 MCU, and STM 32.
- The I2c OLED display module uses an SSD1306 embedded driver IC and communicates via the I2C/IIC interface, requiring only two I/O ports.
- Raspberry Pi screen module does not require a backlight and has an ultra-high contrast ratio, making small fonts clear and easy to read. There are no embedded fonts in the module, users can create fonts using font generation software.
- 0.91 inch OLED display with a resolution of 128 x 32 and a viewing angle greater than 160°. It supports a voltage range from 3.3V to 5V DC, with a normal operating power consumption of 0.04W and a power consumption of 0.06W when the screen is fully lit.
9.3Excellent
View offer on:
Show more
5
HosyondHosyond 5 Pcs 0.96 Inch OLED I2C IIC Display Module 12864 128x64 Pixel SSD1306 Mini Self-Luminous OLED Screen Board Compatible with Arduino Raspberry Pi (White)
Main highlights- There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
- No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts
- It compatibles with Arduino Nano, R3 board and Mega, Raspberry pi, 51 MCU, STIM 32, etc.
- Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 inch,Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
9.1Excellent
View offer on:
Show more
6
Generic0.91 inch 128x32 I2C IIC Serial OLED LCD Screen DIY Module 4-PIN DC 3.3V 5V 12832 SSD1306 Low Consumption LED Display Compatible with PIC Ar-duino
Main highlights- ☆Small DIY module for DIY makers to create miracles.
- ☆Low power consumption, easily installed and serviced.
- ☆Its display performance is better than the traditional LCD display.
- ☆An OLED display has no need of backlight, because it is self-illumination.
- ☆0.91 inch display screen, clear to read.
9.0Excellent
View offer on:
Show more
7
ideasparkideaspark 3Pcs 0.96 Inch OLED Display 3-Colors 128x64 SSD1306 SPI I2C IIC Serial LCD Screen Module Board with 4 Pins Soldered and 10 Dupont Cable Work Great with Arduino for Raspberry Pi
Main highlights- Resolution: 128 x 64, View angle: > 160°,Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
- Package List: 1 x Yellow-Blue OLED display,1 x White OLED display,1 x Blue OLED display,10 x Female to Female Dupont Cable,1 x Storage Box
- Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
- Embedded Driver IC: SSD1306.Communication: I2C/IIC Interface, only need two I / O ports
- 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. Work great for Arduino UNO and Mega, for Raspberry pi, 51 MCU, STM 32,etc
8.8Very Good
View offer on:
Show more
8
ideasparkideaSpark Nano V3.0,Nano Board ATmega328P CH340 Micro Controller Built-in 0.91'' OLED Display 128x32 SSD1306 IIC I2C Completely Compatible with Arduino Nano V3.0
Main highlights- Original ATmega328P chip is used. New version driver CH340 Replace FT232RL
- Nano board integrates a 0.91 inch OLED display,get rid of annoying wires and breadboards.Display has SSD1306 driver,128X32 high-resolution,no backlight,is I2C or SPI compatible.The Board using I2C connecting to OLED Display(I2C: A4 (SDA) and A5 (SCL))
- It works with a Mini-B USB cable,7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source
- How to make OLED work: Step 1: G-oogle or B-ing to search keywords:"CH340 Driver" to install CH340 driver.Step 2: Refer to the Third picture, set up IDE, Upload the Sample Code shown in the image to the board
- Completely compatible with arduino Nano Arduino IDE.The Nano V3 0.91'' OLED Board is a small, complete, and breadboard-friendly board based on the ATmega328P. It offers the same connectivity and specs of the UNO board in a smaller form factor.Works the same as original Nano, runs perfectly on programming software,and fully compatible with Windows, Mac and Linux operating system
8.6Very Good
View offer on:
Show more
9
Kiro&SeeuKiro&Seeu 0.91 inch 128x32 I2C IIC Serial OLED LCD Display Screen DIY Module 4-PIN DC 3.3V 5V 12832 SSD1306 Low Consumption LED Display Compatible with PIC Ar-duino
Main highlights- The I2c OLED display performance is better than the traditional LCD display, also lower consumption, high resolution OLED for any of your micro controller projects, 128x32 pixels gives you a nice sharp, crisp text output.
- The 12832 display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface.
- The 0.91 display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver.
- 0.91 oled compatible with Ardu ino, ESP8266, ESP32, STM32, etc
- 0.91 inch OLED display, no need backlight, self-illumination, Display Color : White, Resolution: 128 x 32.
8.5Good
View offer on:
Show more
10
Teyleten RobotTeyleten Robot 0.96 inch LCD OLED Display Board Module 12864 128X64 IIC I2C SSD1306 Driver 4 Pins for Raspberry Pi Arduino(5pcs, White Light)
Main highlights- Voltage: 3V ~ 5V DC
- Ultra-low power consumption: full screen lit 0.08W
- There is also a removable transparent film on each OLED glass surface for scratch resistant protection until use.
- Pins has been soldered,comes in a small box to prevent it from being dropped during transportation
- Pin Definition: VCC,GND,SCL, SDA
8.4Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for arduino oled 128x32 ssd1306
