10 Best Anycubic Wash And Cure 20 In The Us
Best Choice1
ANYCUBIC26% OffANYCUBIC Wash and Cure 3 Plus Station and LCD 3D Printer Accessories Cleaning Tool Kits
Main highlights- 【Rapid Filtration, High Durability】After the printing, the solid residue can be filtered easily and separated rapidly, thus facilitating recycling of resin. The funnel is made from stainless steel, and is durable, hard-wearing and crash-resistant.
- 【Highly Hard-wearing,Durable and Protective】Gloves are made of high-quality nitrile latex. They are thus hard-wearing, durable and corrosion-resistant, and can be used for a long time. It can also prevent sharp models from piercing palms, thus providing good protection in the process of washing models and machines.
- 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
- 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
ANYCUBIC28% OffANYCUBIC Wash and Cure 3 Plus Station and ABS-Like Resin Pro 2, Gray 1KG, Resin 3D Printer Bundles
Main highlights- 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
- 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- 【Enhanced Strength and Toughness Beyond ABS Resin】 Based on the excellent tensile and bending strength of the previous version of ABS-like resin +, Anycubic ABS-Like Resin Pro 2 strengthens the toughness performance, increases the elongation at break by more than 100%, and the finished model is stronger and more durable, which can be used to print high-strength and high-toughness models such as structural parts, industrial prototype parts, and fixtures.
- 【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
- 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
9.8Exceptional
View offer on:
Show more
3
ANYCUBIC27% OffANYCUBIC Wash and Cure 3 Plus Station, Size-Upgrade Wash Cure Machine with Gooseneck Light, Dual-Layer Design and IPA Saving, for Anycubic Photon Mono M5 M7 Saturn LCD/SLA/DLP 3D Printer
Main highlights- 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 series or other 10.6 inches and below.
- 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
- 【Efficient IPA utilization】The dual-layer PP material cleaning basket supports washing with platform and rust-resistant. It is equipped with two adjustable heights of 150 mm and 250mm allowing printing platforms from 6.6 to 10.6 inches, maximizing alcohol usage efficiency.
- 【Dual-layer Curing】A specially designed double-layer curing platform increases the number of models cured per cycle and markedly improves curing efficiency.
- 【Better Curing Effect】The Anycubic Wash & Cure 3 Plus features a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20%* improvement in curing uniformity than previous generation Wash & Cure Plus. This results in a more thorough and comprehensive overall cure of the model, ensuring better quality and consistency.
9.6Exceptional
View offer on:
Show more
4
ANYCUBIC27% OffANYCUBIC Wash & Cure Plus 3.0, Large Size for Anycubic Mono M5s LCD MSLA SLA 3D Printer, Powerful Curing Light, Improved IPA Usage, Cleaning Volume 8.97''x5.03''x10.23''
Main highlights- 【Size Upgraded, Capacity Increased】Compared with Anycubic wash & cure plus, wash and cure 3 plus’s washing basket volume is increased by about 13.4% to 7.6L, and total volume of the washing bucket is 12L, which is suitable for LCD 3D printers of 10.6'' and below.
- 【Simple Operation, Easy to Use】Cleaning and curing dual mode in wash and cure 3 plus, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Cleaning and curing time can be easily adjusted from 1 to 30 minutes at will.
- 【Partial Enhanced Curing】The innovative Flexicure gooseneck lights increases the energy value by 30,000uW/cm²over a 1-3 cm irradiation range, thus taking good care of delicate areas such as the top of the model or figure details.
- 【Dual-Layer Design, Saving and Efficient】The platform cleaning mode of wash & cure 3 plus is equipped with two adjustable heights of 150mm and 250mm, allowing the printing platform to range from 6.6'' to 10.3'', maximizing IPA usage efficiency.
- 【Better Overall Curing】Anycubic Wash & Cure 3 Plus adopts a brand-new arrangement of lamb beads combined with a lens light source. It offers a 20% improvement in curing uniformity compared to wash&cure plus, thus 3d models can achieve better quality and consistency after curing.
9.3Excellent
View offer on:
Show more
5
ANYCUBICANYCUBIC Resin 3D Printer Post-Process, Wash and Cure Station 3.0 for Most LCD/SLA/MSLA/DLP Resin Printer, Detergent Saving&Dual Cleaning and Curing Models
Main highlights- 【Upgraded Cleaning and Curing Volume】 Anycubic Wash& Cure 3 has an impressive 42% increase than the wash & cure 2.0 in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for resin 3D printers with a size of 7.3 inches or less.
- 【Powerful Curing Light】By adopting a brand-new arrangement of light beads and lens light source, Anycubic Wash & Cure 3.0's curing uniformity has been enhanced by 20%* compared to its predecessor 2.0. The powerful light source for more efficient full curing of models
- 【Optimized Details Curing】 Flexicure Gooseneck design increases the energy value by 30,000uW/cm² in the 1-3 cm irradiation range and improves the curing effect on top of the model and other small parts.
- 【Easy to Use】 Cleaning and Curing Dual Mode and Enhanced Gooseneck Lamp Cure Mode are individually keyed and can be easily switched on and off at the touch of a button. Cure time can be adjusted from 1 to 30 minutes with the rotary knob control. Wash and cure 3 produces less noise during operation, providing a quiet working environment.
- 【Dual-layer Design】Wash& Cure 3.0 double-layered PP material cleaning basket supports simultaneous cleaning of platforms and is designed to save detergent with two adjustable heights of 100 mm and 165 mm to flexibly accommodate printing platforms from 5.9’’ to 7.3’’.
9.2Excellent
View offer on:
Show more
6
ANYCUBIC26% OffANYCUBIC Wash and Cure 3.0 + ANYCUBIC Standard Resin V2 Grey 1kg 3D Printer Resin
Main highlights- 【Wide-range of Applications】 As an entry-level resin, ANYCUBIC Standard 3D Print Resin V2 is suitable for printing high intensity models that require high strength and toughness, such as industrial parts, assemblies, tools, architectural models, prototype proofing, figure design, etc., while maintaining a high success printing rate.
- 【High Strength & High Toughness】Based on the classic ANYCUBIC 3D Printing Standard Resin, the ANYCUBIC Standard Resin V2 further enhances toughness, boosting an increase of 93% in elongation at break. The finished models are resistant to impact, durable, and less prone to breaking, while still maintaining a certain degree of flexibility.
- 【High Precision with Minimal Shrinkage】With an even lower shrinkage rate, the chance of distortion is decreased. Achieve top-notch precision and display sharp, vivid details in your prints.
- 【High Compatibility】Compatible with 365-405nm wide band, ANYCUBIC resin 3d printer liquid is suitable for most LCD and DLP light-curing 3D printers on the market, and easier to clean, helping novice users get started quickly.
- 【 Lower-Odor】By upgrading the resin formula, the odor of ANYCUBIC Standard 3D Resin V2 has been significantly reduced, creating a more comfortable printing environment for users.
9.1Excellent
View offer on:
Show more
7
ELEGOOELEGOO Mercury Plus 2.0 Wash and Cure Station, Upgraded 2 in 1 Design Washing UV Resin Curing Box with Washing Bucket, Washing Size of 5.16x3.54x8.66 inches
9.5 Simple to use8.2 Durability8.0 Noise levelWhy we love it
Dual-purpose machine simplifies post-processing.
Efficient washing and curing for multiple models.
High compatibility with most 3D printers.
9.0Excellent
View offer on:
Show more
8
ELEGOO20% OffELEGOO Mercury Plus 2.0 3D Printing Wash and Cure Station V2 for Mars Photon S Photon Mono LCD SLA DLP 3D Printer Models
9.9 Durability9.7 Simple to use9.5 SheernessWhy we love it
UV protected lid
Intelligent curing/washing
Flexible washing mode
8.9Very Good
View offer on:
Show more
9
ELEGOOELEGOO Mercury Plus 2.0 Large Wash and Cure Machine for LCD/SLA/DLP 3D Printing Models Cure Box with Rotary Curing Turntable and Washing Bucket
9.7 Simple to use9.5 for starters9.1 Print QualityWhy we love it
2 in 1: Clean Cure
Flexible Cleaning
UV Block Hood
8.7Very Good
View offer on:
Show more
10
CrealityCreality Wash and Cure Station UW-01 2 in 1 Machine Resin 3D Printer UV Curing Rotary Box Bucket for LCD/DLP/SLA Washing Size 7.48x6.06x7.87 inches
Why we love it
Double row UV lamps
LED HD Touch button
Wash Cure in one step
8.6Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for anycubic wash and cure 20
