6mm Cutter Mill Tools of 2025
Best Choice1
HOZLYHOZLY Woodwork Milling Cutter ,DLC Coating ,UP & Down Cut 2 Flutes Spiral Carbide Milling Tool CNC Router Compression Wood End Mill Cutter Bits,6mm Shank ,6mm Cutting Dia ,32mm CEL Pack of 5
Main highlights- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- SOLID CARBIDE AND DLC Coating: The up and down cut spiral router bit is made of solid carbide. And DLC Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- HIGH PROCESSING EFFICIENCY: The edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32° with high speed, reduce changing times and improve the production efficiency.
- 5PCS UP & DOWN cut spiral router bit with 6mm shank and 6mm cutting diameter, 32mm cutting length, 60mm for total length
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
HilitandHilitand 5pcs 6mm Shank End Mills Tungsten Carbide Single Flute Spiral Milling Cutters CNC Milling Bits
Main highlights- SHARP: Single flute designed end mill with sharp cutting would offer a smooth cutting and chip clearing.
- HANDLE DIFFERENT MATERIALS: Usually these end mills are used for cutting acrylic, PVC, MDF, density board and many other soft materials.
- FIT FOR MACHINES: These milling cutters have 6mm cutting and 6mm standard shank diameter would fit for many milling machines or CNC cutting machines, can be widely used.
- CARBIDE: These end mills are made from high quality tungsten carbide for good hardness and has a sharp cutting .
- 5PCS/SET: There are total 5 pieces end mills in this set that would be great replacement, can be used in different tools.
9.7Exceptional
View offer on:
Show more
3
HOZLY14% OffHOZLY 6X25mm UP &Down Cut Two Flutes Spiral Carbide Tool Cutters for CNC Router Compression Wood End Mill Bits
Main highlights- Without sticking, smokeless, odorless and silent during processing
- Long service life, not easy to break
- Excellent edge-grinding technology
9.5Excellent
View offer on:
Show more
4
TOPPROSTOPPROS Pack of 7 4-Flute Titanium Coat Carbide End Mill Bits, 1.5mm - 6mm HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium
Main highlights- Package Contents: 7 x 4 Flute End Mill Cutter
- Material: HSS End Mill Bits are used for side milling, end milling, finish machining, etc.
- Cutter Diameter: 1.5mm, 2mm,2.5mm, 3mm, 4mm, 5mm, 6mm, Shank Diameter: 6mm, 6mm, 6mm, 6mm, 6mm, 6mm, 6mm,
- Blade Length: 8mm, 8mm, 9mm, 12mm, 14mm, 16mm, 17mm
- Apply to wood, steel, stainless steel, alloy steel, carbon steel, die steel, tool steel, cast iron, titanium, aluminum, etc.
9.4Excellent
View offer on:
Show more
5
HARFINGTONHARFINGTON T Slot End Mill Milling Cutter 6mm Cutting 3mm Depth 6mm Shank Solid Carbide Titanium Coated 4 Flutes for Stainless Steel Alloy
Main highlights- Size - Cutting diameter: 6mm / 0.24"; cutting depth: 3mm / 0.12"; shank diameter: 6mm / 0.24"; shank length: 32mm / 1.26"; total length: 50mm / 1.97"; number of flutes: 4 flutes
- Notes - Used on CNC machining centers, drilling and milling machines, engraving machines. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.
- Material - The solid carbide T-slot milling cutter has has high hardness (HRC92), good toughness, wear resistance, bending resistance and heat resistance. With good milling and cutting performance, carbide can run at higher speed than other substrates.
- Features - Sharp cutting edge provides smooth cutting, not easy to break. Titanium coating provides excellent corrosion resistance, greatly improves wear resistance and hardness, and reduces the coefficient of friction.
- Applications - Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling and cutting stainless steel, cast iron, tool steel, alloy steel, copper, aluminum, composite materials, etc.
9.3Excellent
View offer on:
Show more
6
uxcelluxcell Ball Nose End Mill 3mm Tip Radius Solid Carbide AlTiSin Coated CNC Router Bits 2 Flute Spiral Milling Cutter HRC45 with 6mm Shank 50mm (2-inch) Length
Main highlights- Wide Applications: Suitable for milling and cutting of carbon steel, malleable cast iron, alloy steel, stainless steel, etc. For slot and hole machining. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Tips: The longer the length of the tool clamped by the chuck, the better. Combined with the material to be processed, select an appropriate feed rate and cutting speed to obtain better processing accuracy and performance.
- Solid Carbide Tool: P05 carbide end mill cutter is high hardness, wear resistance, and heat resistance. Carbide material with good milling and cutting performance, ensures high work efficiency. Carbide can run at higher speed than high-speed steel.
- Features: Ball end cut, 2-flute design, spiral chip space design for fast and clean chip removal. Sharp cutting edge provides smooth cutting. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability.
- Ball Nose End Mill: Cutting radius: 3mm / 0.12"; cutting dia.: 6mm / 0.24"; cutting flute length: 12mm / 0.47"; shank diameter: 6mm / 0.24"; overall length: 50mm / 2"; cutting hardness: HRC45.
9.2Excellent
View offer on:
Show more
7
HARFINGTONHARFINGTON T Slot End Mill Milling Cutter 6mm Cutting 1mm Depth 6mm Shank Solid Carbide 3 Flutes for Aluminum Copper Zinc Alloy
Main highlights- Size - Cutting diameter: 6mm / 0.24"; cutting depth: 1mm / 0.04"; shank diameter: 6mm / 0.24"; shank length: 33mm / 1.3"; total length: 50mm / 1.97"; number of flutes: 3 flutes
- Notes - Used on CNC machining centers, drilling and milling machines, engraving machines. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working.
- Material - The solid carbide T-slot milling cutter has has high hardness (HRC92), good toughness, wear resistance, bending resistance and heat resistance. With good milling and cutting performance, carbide can run at higher speed than other substrates.
- Features - Sharp cutting edge provides smooth cutting, not easy to break. Designed with the base substrate without any coatings, good for general purpose milling. Universal round shank can de used with a wide variety of tool holding system.
- Applications - Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling and cutting aluminum, copper, die-cast aluminum, zinc alloy, plastic, etc.
9.0Excellent
View offer on:
Show more
8
AYCHOLIZAYCHOLIZ 1pc 4Flutes Carbide Square End Mill 6mm(0.236" Dia),6mm(0.236" Shk Dia) Tungsten Steel Milling Cutter Micro Grain CNC Router Bits for Alloy Steel High Alloy Cast Iron-HRC55-TISIN Coated
Main highlights- Tips: AYCHOLIZ End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
- TiSiN Coating: High performance TiSiN coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds.
- Strong and Durable: Milling cutter is made of tungsten carbide material, it is high-wearable and has a long life; 4 flutes 35° helix angle design,great for speedy cutting smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance.
- Package Included: 1pc square nose end mill. Cutting diameter: 6mm; Shank diameter: 6mm ; Flute cutting length: 15mm; Overall length: 50mm.
- Application: AYCHOLIZ End mill bits are suitable for side milling, slot milling,step milling,drilling, etc.Suitable for carbon steel alloy steel(up to HRC45),alloy steel(HRC50),cast iron(HRC35 ~ 45), etc.
8.7Very Good
View offer on:
Show more
9
uxcelluxcell 2pcs 6mm Dia 6mm Shank Square Nose End Mill 2 Flutes HRC55 Carbide AlTiN Coated CNC Router Bits Cutter Tools for End Milling CNC Machining
Main highlights- Widely Applications: Suitable for cutting carbon steel, malleable cast iron, alloy steel, die steel, etc. For shallow groove machining, side milling and finishing. Use on CNC machining centers, engraving machines and other high-speed CNC machine tools.
- Square Nose End Mill: Cutting Diameter: 6mm /0.24"; cutting flute length: 15mm /0.59"; shank diameter: 6mm / 0.24"; overall length: 50mm / 1.97"; cutting hardness: HRC55; spiral angle: 35 degree.
- Solid Carbide: The milling cutter is made of tungsten steel (carbide), which has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance, and corrosion resistance. These properties extend tool life and keep end mills edge blades, helping to improve cutting accuracy and efficiency.
- Feature: The helix angle of this milling cutter is 47 degrees. It provides the best cutting effect and improves chip removal during cutting, thereby improving cutting efficiency and surface quality. This angled design can also reduce the load on cutting and machine tools during processing, improve heat dissipation performance, and extend the service life of cutting tools and equipment.
- AlTiN Coating: The surface treatment uses AlTiN coating, which has high hardness, making the tool surface resistant to cutting forces and wear, extending service life; secondly, it also has excellent wear resistance and heat resistance, thereby reducing cutting forces , Improve cutting speed and efficiency, so that the tool maintains stable performance; in addition, the AlTiN coating surface has good lubricity, which can reduce the adhesion of chips between the tool and the workpiece, which help
8.5Good
View offer on:
Show more
10
CoCudCoCud Square Tool Bit, 6mm x 6mm x 200mm, High Speed Steel 4241 Turning Tool Fly Cutter Mill Blank - (Applications: for Lathe Milling Machine), 5-Pieces
Main highlights- ★ Wide Applications --- Suitable for turning, milling, engraving, punching, drilling. Widely used for processing cast iron, A3 ordinary steel, 45 carbon steel, copper, aluminum, die steel, stainless steel, etc.
- ★ Useful Tips --- Used on lathes, milling machines, or metal forming machines. The blanks are necessary for art and craft cutting tools.
- ★ Square Tool Bit Size --- 6mm x 6mm x 200mm / 0.24" x 0.24" x 8"; Hardness: HRC60-62
- ★ Parallel Design --- Parallel cutters have a continuous cutting edge width over the entire length of the tool bit.
- ★ High Speed Steel 4241 --- High speed steel (HSS) tool bit is with high hardness, good toughness, and wear resistance, good for wide ranges of applications.
8.3Good
View offer on:
Show more
Similar products on Amazon
