10 Best 5v Boost Up Board In The Us
Best Choice1
DROK14% OffDROK Voltage Boost Converter, DC 6-30V 5V Step Up to DC 7-32V 12V 24V 5A Adjustable Volt Regulator, LCD Power Supply Module Voltage Current Amp Display Transformer Circuit Board with Case
Main highlights- Parameter --- Input voltage: DC 6-30V; Output voltage: DC 7-32V continuously adjustable (the output voltage must be at least 1.5V higher than the input voltage); Output current: 5A (max), adjustable, recommended to use within 4A; Output power: 60W (max), recommended to use within 50W.
- NOTE --- 1). Constant current adjustable means that CC mode only works when the actual load output current is greater than the setting one, otherwise it will work in a constant voltage state, not the current is adjusted to 2A, then it will become 2A for any load being connected. And if the CC value to be adjusted is small, adjust “ADJ-I” counterclockwise a few more times to change. 2). The case is packaged disassembly to avoid damage during transit. It needs to be manually installed.
- General Application --- This voltage step up converter can be used as ordinary step-up module with over-current protection, constant current LED driver module; DIY a solar power controller, etc.
- Features --- Constant current/voltage mode; Voltage calibration calibration; Protective case; Short-circuit protection; Over-temperature protection; Input reverse connection protection. You can find the PDF Instructions on this page -- Product information -- Product guides and documents -- User Manual [PDF].
- Clear LCD Display --- The boost board is designed with a large clear digital LCD display on which shows both voltage and current value simultaneously. Which is easy to read and can help the user easily monitor the output voltage, then largely enjoy their DIY work.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
DWEIIDWEII 10PCS Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB for DIY Charger (no Welding Version)
Main highlights- ❃❃When the load current is less than 50mA continuously, the output will be turned off.
- ❃❃USB is no welding version
- ❃❃It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- ❃❃1; When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated; 2; When the battery voltage drops below 4.1V, the charging cycle starts again. 3; When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- ❃❃10PCS ( no welding version) Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board LED Display USB For DIY Charger
9.5Excellent
View offer on:
Show more
3
ComidoxComidox 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Step Up Power Module Voltage Boost Converter Board 0.9-5V to 5V 5PCS
Main highlights- Weight: about 1g
- Pin 2.54MM pitch.
- Input voltage: 0.9-5V, output voltage: 5V, maximum output current: 480 mA.
- Dimensions: 11mm x 10.5mm x 7.5mm (ultra-small module, 1mm=0.0393inch)
- DC-DC boost converter module, operating frequency 150KHZ, typical conversion efficiency of 85%.
9.4Excellent
View offer on:
Show more
4
AITRIPAITRIP 10PCS 1.5A Multi-Function Mini Boost Module Step Up Board 3.7V to 5V 8V 9V 12V Step Up Board with LED Indicato for DIY Electronic Voltage Moduler
Main highlights- You can easily convert a single-cell lithium battery to 5V 8V 9V 12V.
- The output voltage can be set to 5V/8V/9V/12V, the default is 12V
- The maximum output current reaches 1A.
- Product size: 22 × 11 × 3.6mm
- Input voltage range: 2.5V~VOUT-0.5V
9.2Excellent
View offer on:
Show more
5
Newzoll5 X DC 1V-5V to 5V Boost Module Board Mobile Power Supply Charging Step Up Module
Main highlights- PCB Dimensions: 17.55mm * 25.22mm * High 5.85mm (excluding usb height)
- Output voltage: 5V
- Output Current: 500mA
- Input voltage: 1V ~ 5V
- 100% brand new and high quality
9.1Excellent
View offer on:
Show more
6
JUZITAO12PCS Type-C USB 5V 2A Step-Up Power Module Boost Converter Lithium Battery Charging Protection Board with LED Indicator(Not Welded)
Main highlights- When the load current is less than 50mA continuously, the output will be turned off.When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
- When the battery voltage drops below 4.1V, the charging cycle starts again.When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
- The boost converter supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- It supports discharging while charging. The usb-a base weldingposition is provided on the back of the product, which can be installed manually.
- Input voltage range: 5 ~ 5.5V; Charging cut-off voltage: (4.2v/4.35v) ± 0.5%; Charging current: 2.4A ± 5%; Boost output voltage: 5V ~ 5.15v (line loss compensation); Boost output voltage ripple: 100mV; Boost output current: 2A.
9.0Excellent
View offer on:
Show more
7
E-outstandinE-Outstanding 2PCS PFM Control DC-DC 0.9V-5V to USB 5V Boost Step-up Power Supply Module Booster Circuit Board
Main highlights- The lamp on the circuit board can indicate the working state of the circuit board.
- PCB Size: 34x16x11 mm/1.34x0.63X0.43 Inches(LXWXH). Package:2 PCS.
- Onboard subminiature PFM control DC/DC boost controller chip.
- Input 0.9 V ~ 5 V dc voltage, stable output 5 V dc voltage.
- Directly use the USB interface to power USB interface devices.This can provide power for your mobile phone, camera, single-chip microcomputer and digital products.
8.7Very Good
View offer on:
Show more
8
DIANNDIANN 10pcs 3.7V to 5V 8V 9V 12V Mini DC-DC Boost Module Step Up Board with LED Indicator for Electronic DIY
Main highlights- When the Default 12V Output, the LED Indicator Consumes About 6MA of Electricity; If the Indicator Light is Turned Off, the Input Current <1MA When No-Load
- The DC to DC Boost Converter Can Be Powered By Any Suitable DC Power Source: Battery, Solar Panel, Rectifier, DC Generator etc.
- Output Voltage: 5V/8V/9V/12V; The Default is 12V
- Output Capacity: When It Comes In and Out with 3.7V Lithium Battery, It Can Output 5V 1A, 8V 0.7A, 12V 0.5A, When It Outputs At 5V, It can output 8V 0.7A, 9V 0.7A,12V 0.5A
- Input Voltage Range: 2.5V-VOUT;The Input Voltage Must Be Lower Than the Set Output Voltage
8.4Good
View offer on:
Show more
9
QEBIDUMQEBIDUM 10Pack DC-DC Step Up Converter Board Module, 0.9 V 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V Synchronous Switching Regulator DIY Non-Isolated Voltage Boost Converter for Arduino
Main highlights- Ultra-Small Size: The boost converter module dc to dc is mini size, 11mm*11mm size, with 2.54mm interface.
- Ultra-Low Power Consumption: When there is no load, the input current is only 3uA（Input Voltage more than 3V）, effectively reducing energy consumption and extending the battery life of the device, QEBIDUM boost converter suitable for IOT applications.
- The Wide Input Voltage Range: QEBIDUM dc to dc step up converter Supports voltage input from 0.8V to 5V, adapt to various power conditions, and ensures stable operation in various application scenarios, such as IOT Application.
- PFM/PWM Automatic Switching: low power dc to dc voltage booster works in PFM mode when lightly loaded and automatically switches to PWM mode when heavily loaded. The maximum frequency is 1.2Mhz, and high frequency modulation reduces output ripple.
- Multiple Protection Functions: The dc voltage booster input side has a one-time fuse, and the boost regulator output supports overcurrent protection and short-circuit protection, as well as over-temperature protection and other functions.
8.3Good
View offer on:
Show more
10
ACEIRMCACEIRMC 3pcs XL6019 5A High Power Current DC to DC Step-up 5V 6V 12V 24V 3-35V to 5-40V XL6019 Converter Adjustable Voltage Regulator Power Modules Boost Module Booster (3pcs)
Main highlights- XL6019 5A Current DC to DC Adjustable Boost Power Supply Board Module
- Input and Output must be connected correctly
- Conventional Constant Voltage Output BOOST Fully Integrated Solutions, Integrated MOSFET, Fewer External Components, Smaller Cos System
- Built-in over temperature protection, full set overcurrent protection circuit reliability, high reliability
- Adjust the blue knob of the potentiometer (counterclockwise general impulse, buck clockwise rotation) and with a multimeter to monitor the output voltage reaches the required voltage
8.2Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 5v boost up board
