10 Best 34 Dual Shaft Stepper Motor In The Us - Black Friday 2024
Best Choice1
CNCTOPBAOSCNCTOPBAOS 4 Axis Nema23 Stepper Motor Kit,425oz-in 112mm 3A Dual Shaft,Motor Driver CNC Controller Kit,Mach3 Control Board,36V Power Supply for CNC Router Milling Engraving Machine
Main highlights- Wirings: Driver's Pin A+ to Motor's Red Wire / A- to Green / B+ to Yellow / B- to Blue; Breakout board's EN pins connect to Driver's EN- port;DIR connect to DIR- port;STEP connect to PUL- port; 5V connect to EN+,DIR+ and PUL+
- Power supply: 400W,36V/9.7A switching power supply; Output Voltage:36V ; Input: 110-120V AC or 220-240V AC
- Model:23HS2430B; Nema23 Stepper Motor: Step Angle: 1.8degree; Current: 3.0A; Holding torque: 425oz-in 280N.cm; Shaft: Dual Shaft; Shat diameter: 8mm; Motor Size: 57x57x112 mm
- CW5045 Stepper Motor Driver: Input voltage: 24-50V DC; Current: 1.3A-4.5A ; 256 Microstep: 1 at 1.8 degree, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250
- 5 Axis Breakout Board: 5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the computer at the same time;Working voltage is 5V DC and support with MACH3,EMC2,KCAM4 software
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
RATTMMOTORRATTMMOTOR 3 Axis CNC Controller Stepper Motor Kit, Nema23 Stepper Motor 270oz-in 3A Dual Shaft 23HS8430B, TB6600 Stepper Motor Driver, CNC Motion Control Board Mach3 USB Card, 24V Power Supply
Main highlights- 【Upgraded 4.5A Stepper Motor Driver】Using the latest TB6600 new installation chip, there are low-voltage shutdown, thermal over-stop and over-current circuit protection, and compared with the TB6560 increased short-circuit protection. TB6600 driver operating voltage of DC 10-45VDC, support for sub-division of the whole step, half-step, 1/4, 1/8, 1/16 step, up to 42/57/86 two-phase / four-phase / four-wire / six-wire stepper motors within 4.2A. / six-wire stepper motor.
- 【USB Interface, Drive-free Design 4-Axis Linkage Control Card】Output pulse frequency of 100KHz, using the minimum error interpolation algorithm, high processing accuracy. Supports up to 4 axes of linkage control, of which the 4th axis can be set as the slave axis. The control card can be connected to PC-compatible computers such as laptops, desktops, tablets and other computers with a USB interface. As long as Mach3 is running, the control card can be used without installing any drivers.
- 【Stable output 24V DC power supply】Over-current, over-voltage and overload protection, power supply stable power supply, electrical energy conversion rate of up to 90%, higher efficiency. Together with the heat dissipation fan design, shell hollow design, heat dissipation ability faster and stronger, more durable performance.
- 【Multi-function control card】General-purpose opto-couplers isolation input : can support the limit switch, emergency stop switch, auto tool zero, home switch and electronic handwheel; Have 0-10V signal output , you can use mach3 software to control the spindle motor speed; 4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps or other device.
- 【Motor and TB6600 Driver wiring】Stepper motor's RED wire connects to driver's A+ port. Stepper motor's GREEN wire connects to driver's A- port. Stepper motor's YELLOW wire connects to driver's B+ port. Stepper motor's BLUE wire connects to driver's B- port.
- 【Low Noise/High Torque Hybrid Stepper Motor】23HS8430B 2-phase stepper motor with dual shaft diameter of 8mm, a current of 3A and an angle of 1.8°, is made of durable metal on the outside, and the perfect combination of rubber and rotor fills up the inner space and stabilizes the overall structure of the motor. The coils are made of pure copper enameled wire and the torque is up to 270oz-in (180N.cm/18kg-cm). The motor runs quietly and doesn't cause the generator to become too hot over a long time.
- 【Control Card and TB6600 Driver wiring (X-axis as an example) 】Driver's "CLK-" connects to control card's XP pin , Driver's "CW-" connects to control card's XD pin , Driver's "5V" connects to control card's 5V pin.(The USB Mach3 control card can't support connection EN- and EN+).
9.6Exceptional
View offer on:
Show more
3
CNCTOPBAOSCNCTOPBAOS Nema34 Stepper Motor 5.0A 154mm Length,12Nm 1600oz-in 1.8° 2-Phase Hybrid,with Key-Way 14mm Dual Shaft for CNC Router Milling Lathe Large Engraving Machine 34HS5802B
Main highlights- The rotor surface is coated with imported epoxy resin adhesive, making the motor magnetic field more stable and prevent shaft jamming during operation
- Model: 34HS5802B Nema34 86 Stepper Motor; Type: 2 Phase Hybrid; Step Angle: 1.8°; Current: 5.0A; Holding torque: 1600oz-in 12N.m; Shaft:14mm Dual Shaft; 4 Lead Wires: A+ to Red ; A- to Green ; B+ to Yellow ; B- to Blue; Motor Size: 86x86x154mm
- Materials: The motor coil is made of pure copper coil, with low heat generation and extended service life;The body shell adopts a high hardness motor steel shell, which is sturdy and durable, with frosted metal side walls to increase friction
- Applications:Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Router , Industrial equipment and other automation devices etc
- Advanced Manufacturing Technology: Advanced winding technology is used, and the copper wire is evenly arranged, which is not easily deformed during long-term operation
9.4Excellent
View offer on:
Show more
4
Automation Technology Inc.Nema 34 Dual Shaft Stepper Motor 465 Oz-in, KL34H260-35-4B
Main highlights- 4-wire Bi-polar
- 3.5 Amps Current Per Phase ( Bipolar Parallel)
- 1.8° /200 Steps Per Rev.
9.2Excellent
View offer on:
Show more
5
CNCTOPBAOSCNCTOPBAOS Nema34 Stepper Motor 5A 116mm Length,8.5Nm 1230oz-in 1.8° CNC Router 86 Motor 850Ncm,with Key-Way 14mm Dual Shaft for Milling Lathe Engraving Machine 34HS4802B
Main highlights- The rotor surface is coated with imported epoxy resin adhesive, making the motor magnetic field more stable and prevent shaft jamming during operation
- Model: 34HS4802B Nema34 86 Stepper Motor; Type: 2 Phase Hybrid; Step Angle: 1.8°; Current: 5.0A; Holding torque: 1230 oz-in 8.5N.m; Shaft: 14 mm Dual Shaft; 4 Lead Wires: A+ to Red ; A- to Green ; B+ to Yellow ; B- to Blue; Motor Size: 86x86x116 mm
- Materials: The motor coil is made of pure copper coil, with low heat generation and extended service life;The body shell adopts a high hardness motor steel shell, which is sturdy and durable, with frosted metal side walls to increase friction
- Applications:Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Router , Industrial equipment and other automation devices etc
- Advanced Manufacturing Technology: Advanced winding technology is used, and the copper wire is evenly arranged, which is not easily deformed during long-term operation
9.0Excellent
View offer on:
Show more
6
STEPPERONLINESTEPPERONLINE Nema 34 Stepper Motor 8.5Nm(1203.94oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable
Main highlights- NEMA 34 bipolar 2 phase stepper motor wihr 4-lead
- Low Vibration, Low Noise, High Speed
- Holding Torque: 8.5Nm(1203.94oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC
- Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices
- 1.8 deg. step angle(200 steps/rev)
8.8Very Good
View offer on:
Show more
7
STEPPERONLINESTEPPERONLINE Nema 34 Stepper Motor 4.8Nm(679.87oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable
Main highlights- NEMA 34 bipolar 2 phase stepper motor wihr 4-lead
- Low Vibration, Low Noise, High Speed
- Holding Torque: 4.8Nm(679.87oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC
- Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices
- 1.8 deg. step angle(200 steps/rev)
8.6Very Good
View offer on:
Show more
8
STEPPERONLINESTEPPERONLINE Nema 34 Stepper Motor 13.0Nm(1841.31oz.in) 6.0A 14mm Key-Way Shaft with 1m Cable
Main highlights- NEMA 34 bipolar 2 phase stepper motor wihr 4-lead
- Low Vibration, Low Noise, High Speed
- Holding Torque: 13Nm(1841.31oz.in), Rated Current/phase: 6.0 A, Voltage : 36-60VDC
- Application: The stepper motor is widely use for 3D printers, medical equipment, industrial equipment, laser CNC machine, automation devices
- 1.8 deg. step angle(200 steps/rev)
8.4Good
View offer on:
Show more
9
STEPPERONLINESTEPPERONLINE Nema 24 Dual Shaft CNC Stepper Motor 3.1Nm/439 oz.in 8 Leads Bipolar/Unipoar CNC
Main highlights- Step Angle: 1.8deg
- Recommended Voltage: 24-48V
- Motor Type: Unipolar/Bipolar
- High torque Nema 24 stepper motor
8.2Good
View offer on:
Show more
10
CNCTOPBAOSCNCTOPBAOS Nema34 Stepper Motor 4A 98mm Length,5.6Nm 878oz-in 1.8° 2-Phase Hybrid,with Key-Way 14mm Shaft 560Ncm 86 Motor for CNC Router Engraving Milling Machine Lathe 86x86x98mm 34HS9801
Main highlights- The rotor surface is coated with imported epoxy resin adhesive, making the motor magnetic field more stable and prevent shaft jamming during operation
- Model: 34HS9801 Nema34 86 Stepper Motor; Type: 2 Phase Hybrid; Step Angle: 1.8°; Current: 4A; Holding torque: 878 oz-in 5.6N.m; Shaft: 14 mm Single Shaft; 4 Lead Wires: A+ to Red ; A- to Green ; B+ to Yellow ; B- to Blue; Motor Size: 86x86x98 mm
- Materials: The motor coil is made of pure copper coil, with low heat generation and extended service life;The body shell adopts a high hardness motor steel shell, which is sturdy and durable, with frosted metal side walls to increase friction
- Applications:Semiconductor Equipment, Milling Machine, Engraver Machine , CNC Router , Industrial equipment and other automation devices etc
- Advanced Manufacturing Technology: Advanced winding technology is used, and the copper wire is evenly arranged, which is not easily deformed during long-term operation
8.1Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 34 dual shaft stepper motor
