10 Best 18650 Module Tester In The Us
Nuhikap 8-Channel 18650 Lithium Battery Capacity Tester Module MAh MWh Digital Battery Power Detector Module Type-C
Main highlights- 5. Channel synchronisation: support 8 channels to set up synchronisation, also can set up each channel parameter individually. Cycle charging and discharging: only support charging-discharging-charging 1 cycle in automatic mode, do not support multiple cycles.
- 4. 18650 battery holder using compact battery holder, suitable for flat battery measurement. Channel type: 8 channels, each unrelated, operation, without mutual influence.
- 3. U-shaped groove at the back is combined with PCB board, and the fan actively dissipates heat to form a heat dissipation channel.
- 2. Voltage and current curve display, real-time voltage and current, DC two-wire to measure internal resistance.
- 1. The blue segment at the upper end is the external discharge terminal, and the lower end has the working indicator of the corresponding channel.
- Curious about how we select the top products for you? Explore How It Works
MakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar
Main highlights- Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A.
- Two power supply methods: 1. DC6-12V DC5.0 power supply; 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout.
- Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!
- How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00); 2. Fast button twice capacity reset (mAh); 3. Fast button three power reset (ㅁ);4. Fast button Four time reset (00:00:00); 5. Fast button five settings auto standby, Discharge count down regularly; 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration.
- 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current); 10V input Approximately 18A discharge current 20V input Approximately 9A discharge current 30V input Approximately 6A discharge current.
VISLONE Digital Display Battery Capacity Internal Resistance Tester Digital Lithium Battery Power Detector Module 18650 Battery Test Meter Dual Type-C Interface
Main highlights- The product supports four-channel capacity and internal resistance measurement, each channel is independent of each other, set up separately and run independently without interfering with each other.
- Support separate charging, separate discharging, automatic mode supports up to 9 charging and discharging cycles.
- Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, a total of 11 adjustable gear.
- Full automatic cut off charging, discharge to reach the conditions automatically stop, automatic mode 1 ~ 9 times adjustable cycle.
- Adopts direct current two-wire method to test internal resistance, with high accuracy of value when the battery is fully charged.
ZORZA 1Pcs Type-C 18650 Battery Capacity Tester Lithium Battery Internal Resistance Tester 4-Channel Automatic Charge Discharge Module for Flat Ends 18650 Batteries
Main highlights- This battery tester operates on a DC5V power supply and is equipped with dual Type-C ports (power cord not included, compatible with C-type phone cables). It utilizes a direct current two-wire method for internal resistance measurement and provides status indicators. It also offers high-temperature protection and active heat dissipation.
- The compact design of the 18650 battery holder supports flat top batteries and allows for easy measurement (compatible with batteries with discharge voltage between 2.5V and 3.5V, and charging voltage at 4.2V).Please note automatic charging and discharging function is not suitable for lithium iron phosphate batteries.
- Switching between Chinese and English interface: Press and hold the "Menu/M" button while powering on. Release the button when the screen lights up. After turning on, wait for 10 seconds before disconnecting the power. When powered on again, the language switch will be completed.
- Our battery tester supports independent 4-channel internal resistance and capacity measurements, allowing you to accurately assess your batteries.
- It features a charging function with automatic cutoff when the batteries are fully charged, ensuring their safety and longevity.The discharge function automatically stops when predetermined conditions are met, preventing over-discharging.In automatic charging mode, it supports up to 9 cycles of charging and discharging, optimizing battery performance.
Zaagot Upgraded 18650 Lithium- Battery Capacity Tester Module MAh MWh Digital Battery Power Detector- Module 18650 Battery Test Plastic Electronic Components
Main highlights- ❀ Supports four-channel capacity and internal resistance measurement.
- ❀ Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode-.
- ❀ Each channel is independent of each- other, set separately, operates independently, and does not interfere with each other-.
- ❀ Active cooling of fan supports overheating protection, Using two-wire method- to measure internal resistance.
- ❀ 18650 battery holder uses compact- battery holder, suitable for flat-head battery measurement.
Battery Internal Tester 1.77in LCD Display Modes Adjustable Data Reset Lithium Battery Capacity Tester Module Battery Testing Module DIY DC5V
Main highlights- Working Instructions: Some components will produce local high temperature during charging and discharging during use. Please ensure that the use environment is open and of cover. It is better to increase fan heat dissipation. In order to ensure that the battery clamp is firm, the battery tester is more suitable for flat head battery measurement.
- Scope of Application: This battery capacity tester is mainly used for test the capacity of battery, check for better using experience!
- Modes Adjustable: Preset automatic and charging and discharging modes, and select corresponding modes after starting.
- LCD Display: The 1.77in screen displays internal resistance, capacity, voltage, current, power and other information at the same time.
- Data Reset: The power off, mode switch will make the data capacity, energy and time data automatically reset.
Dlyfull Battery Tester, LCD Display Universal Battery Checker for Ni-MH, Ni-CD, Li-ion, Alk & LiFe04 Batteries(AA AAA C D 9V 12V 18650 CR123A 2CR5 CR2032 Cells), 2X AAA Batteries Included
Main highlights- WHAT YOU WILL GET: Dlyfull-B4 Battery Health Tester & Checker, 2 Alkaline 1.5V AAA Batteries, Welcome Guide, 12-Month Warranty, and Lifetime 24-Hour Friendly Customer Service
- SMART LCD DISPLAY: The battery checker features a sophisticated LCD display screen that showcases the voltage and battery level of the tested battery; The battery level is presented in two formats: as a percentage and battery level bar display, providing clear and precise information about the battery's status
- ROBUST COMPATIBILITY: Universal battery tester is compatible with 12 battery types, including 1.2V Ni-MH/1.45V Zinc Air/1.5V Alkaline/3.0V Lithium Manganese/3.2V LiFePO4/3.7V Li-ion/6.0V, 9.0V, and 12.0V Alkaline packs ect; It supports AAA AA C SC D N sizes, button cells, CR123A, CR-V3, 2CR5, 23A, 27A, and more, offering versatile compatibility for various applications
- PORTABLE & EASY TO USE: Cylindrical batteries can be tested using the black negative pin, while button and combination batteries only need to be placed in their corresponding slots for testing; The compact battery analyzer weighs less than 0.36 pounds, making it extremely convenient for carrying and storage
- NOTICE: Please use 1.5V AAA alkaline batteries to power this product
- CHECK BUTTON: The battery tester includes a self-check button. Press and hold for about 3 seconds to perform a self-check and view the power status of the batteries powering the device, allowing for timely replacement when necessary
IOOOFU Upgraded 18650 Lithium- Battery Capacity Tester Module MAh MWh Digital Battery Power Detector- Module 18650 Battery Test Plastic
Main highlights- ❀ Supports four-channel capacity and internal resistance measurement.
- ❀ Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode-.
- ❀ Each channel is independent of each- other, set separately, operates independently, and does not interfere with each other-.
- ❀ Active cooling of fan supports overheating protection, Using -DC two-wire method- to measure internal resistance.
- ❀ 18650 battery holder uses compact- battery holder, suitable for flat-head battery measurement.
EAJORN Accurate 18650 Battery Resistance Tester Battery Health Tester Battery Capacity Test Evaluate Battery Health with Ease
Main highlights- Versatile Applications Great for testing and assessing 18650 battery functionality in homes, workshops, and other settings.
- User Friendly Designs Simply the battery to display the internal resistance value.
- Suitable for Various Users Perfect for electronic enthusiasts, battery maintenance personnel, and engineers.
- Fast and Results Obtain quick and measurement readings using high sensitivity probes.
- Accurate Internal Resistance Detection Evaluate the condition of 18650 batteries with precisions.
4-Bay 18650 Battery Charger,Test Battery Capacity,Touch Button,Universal Battery Charger for: 3.7V 26650 20700 18650 18350 1.2V NiMH/Cd AA AAA Size Batteries
Main highlights- ☆【Universal Battery Charger】4 bay battery charger is fully compatible with 3.7V Rechargeable Batteries:18650,26650,22650,20700,18350,18490,18500,18700,17335,17670,17500,16340 ,14500, 10440 , 14650, 25500,32650, 1.2V NiMH/Cd: AA, AAA,SC, C Size.(It cannot charge all 1.5V batteries, including AA AAA batteries)
- ☆【Touch Button 4-Bay Battery Charger】Long press the MODE touch point to switch between these four modes: first tap the 1-2 or 3-4 touch point to select the channel, then long press MODE to change the original mode, tap MODE to select the desired mode, press CURRENT The touch point changes the current size, and it enters the working state without any action for 8 seconds after selection, which is easy to use.
- ☆【Fast Charge, Easy to Use】The charger can change independent charging or different current selection according to the corresponding touch point function, as well as mixed charging of different batteries, which is easy to operate; in the working state, you can tap (1-2, 3-4) touch points to view the corresponding channel current (mA) /Capacity(mAh)/Voltage(V)/Time(h) and other data reference values.
- ☆With CHARGE, DISCHARGE, TEST and STORAGE four working modes, can work in separate channels at the same time, independently set charging/DISCHARGE capacity detection, normal capacity detection function;In test mode, the normal battery capacity test process consists of three steps (1. Fully charged, 2. Then discharged fully, 3. Fully charged);Charge mode and test mode can work at the same time; charging capacity test / normal capacity test function can be set independently.
- ☆Touch button adopts the design of touch buttons, and it will send out a "beep" sound feedback when touched. Responsive and easy to operate.
Black Friday Sale
Deal ends in
HrsMinSec