10 Best 18650 Battery Charger Holder Power Bank Box In The Us - Black Friday 2024
XBERSTAR 18650 Power Bank case,Li-Ion Battery Storage Box -18650 Holder for Uninterrupted Power Supply UPS DIY Battery Special Plastic DIY kit (set1)
Main highlights- You will get;3S 40A BMS -US Charger -18650 Li-Ion Battery Holder -Pure Nickel Strip(not include batteries )
- Installation: Easy and simple to use and operate, no other tools needed to install.Install the battery according to the positive and negative sides on the circuit board. Be careful not to reverse it.
- High quality battery holder case with wire leads for easy soldering and connecting.Each battery holder comes with a case cover for keeping the battery in place
- Attention: There is a specific product description on the picture, please read it in detail.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
9.9Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
LIJIANILIJIANI Battery Charger Case,Portable DIY Power Bank Box with LCD Display 2 USB Output,Micro and Type c Input, Smart Charger for 3.7v Li-ion Rechargeable Battery (Battery Not Included)
Main highlights- Multifunctional charging case: 4 battery(0.7 inches in diameter - 2.56 inches long) charging case, LCD display battery voltage and current value, the remaining battery power. Can easily remove the battery to power other devices
- Mobile power function: filled with batteries, it is a 10000 mah rechargeable treasure (choose 4 2500 mah batteries), if you choose 3500 mah / a battery, it is 14000 mah rechargeable treasure. Not recommended, different sizes of batteries loaded into use at the same time
- Dual-port input : (MICRO and TYPE-C) 5V-2A, two USB output, 5V-2A, long press the switch can open the flashlight function
- Concern: This product does not include batteries, unfamiliar with Cylindrical lithium batteries, people without DIY spirit, please be careful to buy
- Bad battery detection function: if you load a bad battery, or the battery positive and negative poles are installed backwards, no battery symbols on the LCD display, only normal batteries appear battery symbols
9.8Exceptional
View offer on:
Show more
3
BYNNIX18650 Charger Box USB Mobile Holder C16PD Version Power for Shell Charger Box with Lighting Power Kit 18650 DIY Removable Welding-Free 16-Section 18650 Power Kit DIY Mobile (Black)
Main highlights- Weight: about 206 grams without (for case + mainboard + spring basket + lens + lanyard).
- Size: thickness 44mm width 80mm length 186mm(internal dimensions remove spring: thickness 36mm width 72mm length 146mm).
- Cell: 18650 type flat for head x 16 (free welding).
- C16-PD with light: output/input power: 5V-3A 9V-2A 12V-1.5A.
- Application: Good performance, convenient and practical, suitable for home and professional use.
9.7Exceptional
View offer on:
Show more
4
Garosa4Pcs 18650 Battery Holder,3.7V 18650 2 Section High Temperature Resistance Black Battery Container Case Battery Storage Box Power Bank Charger, for SMD 18650 DIY Charging Power Supply
Main highlights- This housing can be used with your own battery powered system
- This battery case holder is suitable for 18650 batteries.
- These battery cases can be used to make a simple DIY charging power supply.
- Simple structure, easy and convenient installation
- High quality materials ensure product durability and stability.
9.6Exceptional
View offer on:
Show more
5
AOICRIEAOICRIE Dual USB 18650 Battery Charger Protection Module 4pcs, Power Bank PCB Module Board, Dual USB 5V 1A 2.1A
Main highlights- The word "IN" will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word "OUT" and the current and voltage of 5.0V1.0A or 5.0V2.1A will be displayed in the display.
- The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection.
- Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
- LED indicator and LCD display: When charging, the display will show IN letters; after the load is connected, long press the LED light button to start the output, and the display will show OUT letters and the relative output voltage and current 5V1A or 5V2.1A.
- It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200,000 mA, As long as the battery with a voltage of 3.0-4.2V can be used.
9.4Excellent
View offer on:
Show more
6
FORIOTFORIOT 1865O Battery Holder Li-ion Battery with Dual Compartment Support Micro USB 5V/3A 3V/1A V8 Battery Shield
Main highlights- The operating temperature of 1865O module is -20℃ to 70℃, and the conversion efficiency is up to 95%.
- Mobile power built-in lithium battery protection IC , over-current, over-voltage, under-voltage and over-temperature protection.
- Battery voltage in 3.2V-4.2V normal operation, batteries should not be connected in series, the series connection will increase the voltage, such as the need for battery capacity to become larger parallel connection can be.
- 5-level LED light display power, the default boot has been in the working state, need to be manually shut down (if you need to change to non-working state automatic shutdown mode, only need to put the toggle switch, toggle to non-working state automatic shutdown mode can be).
- 1865O mobile power module supports USB output or expansion port data, support 5V/3A and 3V/1A output.
9.3Excellent
View offer on:
Show more
7
diymorediymore 1865O Battery Holder Four Li-ion V9 Battery Shield Micro USB 5V/3A 3V/1A Power Bank Battery Charging Module(4 Holders)
Main highlights- V9 expansion board supports 5V/3A or 3V/1A power output. Micro USB supports 1.5A charging current.
- The normal operating voltage of the battery is 3.2V-4.2V, please do not connect the batteries in series, the series connection will increase the voltage. If you need to increase the capacity of the battery，you can connect in parallel, do not connect in series!
- The mobile power supply has a built-in lithium battery protection IC with over-current, over-voltage, under-voltage and over-temperature protection.
- Pay attention to the positive and negative battery terminals when installing, which are clearly marked on the circuit board.
- Battery expansion boards are mainly used in mobile power or other battery-powered devices.
9.1Excellent
View offer on:
Show more
8
BistookBistook Battery Holder DIY,1 Slot 18650 Battery Holder Box Case-Transparent Cover,No Soldering,Brass Contacts Storage Case with Protection Caps for DIY,6-Pack
Main highlights- Widely Applications: It can be applied to DIY electronics according to your needs. You can also add your own circuit board to convert the battery box into a power bank. This battery holder case can unleash your creativity.
- Warm tips：This product is suitable for DIY and does not include batteries. It's best to use a consumer 18650 flat head battery.
- Protective accessories: The two sides of the DIY battery storage case are with a protective shell with a mortise and tenon structure, which effectively prevents contact with conductive surfaces, and protects the device safely and reliably.
- Material: The battery holder is made of PC+ABS material, and the positive and negative terminals are supported by pure copper M3 screws, which can effectively reduce the resistance. Support 5A(Max) high current.
- Flexible use: Each18650 battery slot is equipped with a transparent plastic cover, which can better fix the battery. You can also splice infinitely according to your own electronic needs and give full play to your creativity
9.0Excellent
View offer on:
Show more
9
LHIABNNLHIABNN DIY Power Bank Box Flat Head Battery Charger Outer Case,2 USB Output Ports Plastic Shell Box with LCD Display,Micro/Phone/Type-c Input Port Power Bank Case (Black)
Main highlights- 【Widely Use】: Compatible For Phone 11 pro max X XR XS 8 7 6 plus/6/5S,for pad,for Samsung Galaxy S8 S7 S2/S3/S4, Note 2/3/4, HTC, for Sony, Xiaomi Motorola and other cellphones. Application - Suitable for various models of mobile phones that support wireless charging fuction.
- 【LCD Display】: Accurate display of power, keep the battery status at any time.Power bank and rechargeable 18650 battery charger. Plug and Play, power output using the USB port, plug the data cable to achieve portable, ready to charge.
- 【Intelligent 18650 Battery Charger】: Compatible with 18650 Flat head lithium battery (69mm length). Each battery slot is individual charging and detection. It automatically terminates charging when the batteries are full charged.(NOTE: Please notice the positive and negative poles)
- 【Easy to Use】: Compact and lightweight design for easy carrying; Easy to install and uninstall; Convenient take and use.
- 【DIY Power Bank】: Large capacity,8 x 18650 batteries (batteries not included). Dual USB power bank, two devices can be charged at same time.Three input ports,any usb cable can charge the power bank.
8.9Very Good
View offer on:
Show more
10
SiruiSIRUI Universal Power Bank Holder, Aluminum Adjustable Power Bank Clamp Mount for Camera, AM-BM
Main highlights- Structural Design: One end of the power bank clamp holder features a thumb screw for adjusting the opening size to accommodate your power bank. The other end is designed with multiple 1/4"-20 threaded holes, allowing for the attachment of additional shooting accessories as needed
- Rubber Pad Power Clamp Holder: The interior of the aluminum clamp is equipped with soft rubber pads to protect your power bank from scratches. Additionally, there is a rubber pad on the back of the clamp, providing protection and preventing slippage
- Lightweight and Durable: The power bank holder is crafted from aluminum alloy using CNC cutting technology, ensuring exceptional durability. Moreover, the product has a net weight of only 0.2lbs/90g, making it extremely lightweight and convenient for easy portability
- For Portable Power Bank: The SIRUI universal power bank holder AM-BM is designed specifically for portable power bank. When a sustainable charging solution is needed, it can secure the power bank to a camera rig, allowing for continuous power supply
- Adjustable Clamp Opening: The power clamp can grip power bank with a width ranging from 55mm to 85mm (2.16-3.35 inches) and a thickness from 0mm to 35mm (0-1.38 inches), covering the majority of power banks available in the market
8.8Very Good
View offer on:
Show more
Black Friday Sale
Deal ends in
HrsMinSec
Related deals you might like for 18650 battery charger holder power bank box
