1 2 Inch Go Kart Clutches of 2025
Best Choice1
VEVORVEVOR Primary Drive Clutch, 780 Series Go-Kart Drive Clutch 1" Bore 1/4" Keyway Comet, for Taking a 1 3/16-1 1/4" Wide Belt 4 Cycle Engines, Replace# 302405A / 302405
Main highlights- Note: Please make sure the engine idle speed is controlled below 1400r/min, otherwise the clutch will not operate normally.
- Efficiency and Smooth Operation: If your kart exhibits issues like abnormal noise, vibrations, or steering difficulties, inspecting and replacing the drive clutch can lead to marked improvements. This upgrade ensures your vehicle operates efficiently, navigates bumpy roads with ease, and maintains quick and smooth transitions between engagement and separation states.
- Dynamic Balance Performance: Manufactured with strict quality control standards, the drive clutch axle undergoes dynamic balance precision processing. Reducing imbalance caused by parts wear, ensuring firm engagement, efficient operation, and minimizing the potential for abnormal sounds and vibrations.
- Durable Alloy Construction: Crafted from iron and aluminum alloy, the primary driving clutch replacement boasts a sturdy build with excellent heat dissipation features. The black surface treatment enhances rust resistance against elements such as oil and rain, prolonging the service life under various environmental conditions.
- Authentic Replacement Parts: Tailored to match original part specifications, this primary drive clutch assembly serve as the perfect replacements for old or worn components. Offering easy two-step assembly without the need for drive pulley or clutch adjustments. Note: Professional installation is recommended, and attention to the engine's bolt requirements (American or metric) to ensure a secure fit.
- 780 Series Drive Clutch: The 780 series primary drive clutch is designed with a 1-inch (25.4mm) bore and a 1/4 inch (6.35mm) keyway, compatible with most motors, including Briggs Stratton Pioneer, Kohler Command, Robin, Honda, Salsbury, CVTech, and CVTech Powerbloc IBC, and most 4-stroke engine crankshaft sizes mentioned. Replacement part number: 302405A and 302405.
9.8Exceptional
View offer on:
Show more
- Curious about how we select the top products for you? Explore How It Works
Value for Money2
waltyoturwaltyotur 780 Series Driver Clutch 1 Bore 1/4 Keyway 302405A Replacement for Golf cart ATV Go Kart
Main highlights- Replaces part number: 302405A
- Replacement for Golf cart, ATV, Go Kart, Pulling tractor, 4 cycle, Custom Go Cart Cushman Scooters, Powerblock, Feterl, Gator, Landpride Land Pride Treker, Amphibious Recreatives 6x6 Max, Textron Jacobsen UTV or may other uses.
- Please check the part number before purchasing to ensure fitment
- Note: Never run clutch w/o a 1 3/16-1 1/4 wide belt installed
- Features: 1 bore with 1/4 keyway, It takes a 1 3/16 -1 1/4 wide belt
9.7Exceptional
View offer on:
Show more
3
AlveyTechAlveyTech 14 Tooth Heavy Duty Clutch Assembly with 1" Bore & #40/41/420 Chain Sprocket for Go-Karts and Mini Bikes
Main highlights- Includes set screws
- Fits many belt-drive bikes & 'karts
- 1" bore diameter 1/4" keyway slot with 14 tooth sprocket.
9.6Exceptional
View offer on:
Show more
4
1PZ1PZ DH7-E4F Go Kart Clutch 1" Bore 14 Tooth with #40/41/420 Chain Predator 212 Centrifugal Clutch 14T for Go Kart Minibike and Fun Kart Engine 8-13 HP
Main highlights- Package include 1x 14 Teeth Clutch, 1 x #40/41/420 Chain and 1 x Accessories Set.
- Made of quality iron material, which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation.
- Hassle-Free Return and Money Back, Shop with Confidence!
- Go kart clutch 14 tooth, 1" bore with 40-41-420 chain; up to 13hp horsepower. speed up to be 2300 RPM.
- Fit for Go Kart, Mini Bike and Lawnmower.
9.5Excellent
View offer on:
Show more
5
caqeg40 Series 1" Bore Go Kart CVT Torque Converter Driver Clutch Fit for Comet 40/44
Main highlights- This 40/44 Series is heavily used in three wheelers, ATV's, LTV's , and Go karts
- Replaces COMET 40/44 Series Torq-A-Verter models and works with 8-16hp engines within the 1600-3300 RPM range
- Fitment: It could be used asGO KARTS, THREE WHEELERS ATV / OTHER SMALL OFF ROAD VEHICLES
- 1" Shaft Bore
9.4Excellent
View offer on:
Show more
6
SutmorlySutmorly Heavy Duty Clutch Assembly with 1" Bore & #40/41/420 Chain Sprocket for Go-Karts & Mini Bikes (14 Tooth Sprocket)
Main highlights- Works with gas engines larger than 6.5 HP (top limit - 13HP)
- We offer you three months warranty, you can buy it with confidence. You will receive the product as the picture.
- Very popular in the Hon da Prokart,Cadet and Fun Kart /Buggy Market
- NOTE Before Buying: The clutch is designed to be able to move a certain amount of weight. Once the weight limit is exceeded, then the life of the clutch will be shortened (it will get burning hot very soon or even broken). Please make sure the total weight of the kart and driver (and passenger when it is a two seat kart) will not exceed 400 pounds (Average weight limit for most clutches).
- Centrifugal Clutch 1" Bore 14 Tooth Perfect for 40-41-420 Roller Chain
9.3Excellent
View offer on:
Show more
7
maXpeedingrodsmaXpeedingrods 25.4mm 1" Bore Centrifugal Pulley Clutch 8-16HP for ATV's, LTV's, Go Karts 200630
Main highlights- 【OEM PART NUMBER】 - 200630
- 【ITEM PACKAGE】 - 1X Centrifugal Clutch 25.44mm 8HP-16HP (No Instruction Included, professional installation is highly recommended)
- 【CENTRIFUGAL CLUTCH SPECIFICATION】 - Clutch Bore: 1" (25.4mm), Rotate Speed Range: from 2000 to 3600 RPM, Belt section: 2B
- 【APPLICATION】 - Ideal for three wheeler, ATV's, LTV's, GO KARTS and other transportation vehicles
- ENGINE TYPE】 - Fit for 8HP-16HP engine, 1" (25.4 mm) Bore with 1/4" (6.35 mm) flat key way
9.2Excellent
View offer on:
Show more
8
BATONECOBATONECO 1" Centrifugal Clutch 1 Inch Bore 14 Tooth with #40/41 420 Chain for Go Karts Mini Bike Lawnmower Heavy Duty Engine Up to 10 HP
Main highlights- Specification: Suitable for 40-41-420 roller chain with 1/4" built-in key .Outside Diameter: 4-3/4 inch, Drum Thickness: 1-3/10 inch, Bore Depth: 1.5", Engagement Speed: 3300 RPM +/- 100.
- Made of Quality Iron Material, Which is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-resisting and Fast Heat Dissipation.Thermodynamically designed clutch shoe increases the clutch capacity to absorb heat without damaging the clutch springs, ensures a longer life and reliability.
- Commonly use: Go Kart and Mini Bike, Lawnmower and Fun Kart, also it can be used for many other applications
- Clutch compatibility: Centrifugal clutch 1" bore 14 tooth design
- Check and Confirm: Please check and confirm compatibility before purchasing.
9.0Excellent
View offer on:
Show more
9
BATONECOBATONECO 40 Series 1" Bore Go Kart CVT Torque Converter Driver Clutch Replaces Comet 40/44 Pulley 203015
Main highlights- This 40/44 Series is heavily used in three wheelers, ATV's, LTV's , and Go karts
- Replaces OEM Part Numbers: 209133A, 209133, 2432, 203015A, 203015
- Replaces COMET 40/44 Series Torq-A-Verter models and works with 8-16hp engines within the 1600-3300 RPM range.
- Compatible with most small engines with horizontal shaft.
- 1" Shaft Bore,1/4" Keyway,8 - 16 HP engines
8.9Very Good
View offer on:
Show more
10
Salem Auto Parts212CC 30 Series Torque Converter Go Kart Clutch 1" 10T #40 41 420 and 12T #35 Chain for Manco Comet TAV2 Mini Bike Clutch
Main highlights- These torque converter 30 series will give your project more power while also giving it more speed. It's the best value for your money to upgrade your kart or mini bike. It's easy to install.
- Parts Includes: 1 x MOUNTING PLATE 1 x PLASTIC COVER 1 x DRIVE PULLEY 1 x DRIVEN PULLEY 1 x DRIVEN BELT HARDWARE 4 x COVER SCREWS 4 x METRIC ENGINE SCREWS 1 x METRIC SHAFT SCREW 1 x JACKSHAFT NUT 1 x SPACER 1 x DRIVER WASHER 1 x NUT WASHER 1 x JACKSHAFT 1 x KEYWAY WASHER 1 x BOLT HOLDER 1 x 10T SPROCKET 1 x 12T SPROCKET 1 x KEY
- Function: This TAV2 30 Series Go Kart Clutch Kit fits a 1" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp.
- Fitment: Works with go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. This 1" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series.
- Belt for 6" Driven: Center to center of driver and driven: 6-15/16 to 7". Length: 27.76"(70.5cm), width: 1"(2.54cm), outside circumference: 27-23/64"
8.8Very Good
View offer on:
Show more
Similar products on Amazon
